Horizontal centrifugal pump designed to meet the most demanding hydraulic coverage requirements and for all types of liquids: Clean and slightly contaminated, viscous, fibrous or non-fibrous slurries, large and hard solids containing liquids.Catalogue
Centrifugal Pump 100% Sulzer* exchangeable pump - EXAMPLE OF USE: 100% interchangeable with APP, NPP, WPP, EPP, A, N, W, E APT, NPT, WPT and EPT series
Centrifugal Pump 100% Andritz* exchangeable pump - EXAMPLE OF USE: 100% interchangeable with S, SPR and ACP series
Vertical Pump 100% Sulzer*/Man* exchangeable pump - EXAMPLE OF USE: 100% interchangeable with NVP, NVT, NPCVX and TURBAIR
Progressive Cavity Pumps
The DIAMCO SP Screw Pump range is designed in accordance with ISO normalization and has been developed as standard or dosing pump, ensuring high performance and excellent reliability.
Our Progressive Cavity Pump is designed to meet the most demanding hydraulic coverage requirements and for all types of liquids.
All alloys and materials available, Rotors as Stainless/Duplex, treated, coated / Stators as Viton, Hypalon, Teflon, EPDM, Buna.
RANGE SP Conventional geometry Geometry L (longer) TYPE Closed coupled / bearing housing.
Closed coupled / bear. hous. + hooper and conveyor. FLOW up to 500m3/h
PRESSURE up to 48 bars
EXAMPLE OF USE: ATEX, Paper, Textil, Beverages, Juice, Oil, Chemicals, Milk, Sugar, Automotive etc.
Horizontal and vertical slurry pumps
The DIAMCO W Slurry pump range has been developed as 100% exchangeable slurry pump with Warman/Weir* type.
Our DIAMCO W range pump is designed to meet the most demanding hydraulic coverage requirements and for all types of liquids.
CAPACITY: Up to 5400 m3/h
TOTAL HEAD: Up to 118m.W.C PRESSURE: Up to 16 bar max. WORKING TEMP: from -30°C up to 95°C
EXAMPLE OF USE: Sugar industry, slurry water, Mining, Dredging, Tunneling
Degassing And Self-Priming Pumps
The DIAMCO DSP range is designed in accordance with ISO 2858 and ANSI international standards. In many production processes there is often some proportion of air and/or gas into the liquids to be pumped. Conventional centrifugal pumps can only operate with a gas content of up to 4%. When it exceed those 4%, bubbles start to accumulate in the impeller eye and impair pumping operations. This reduces capacity and pumping becomes extremely unstable or impossible.
LIQUIDS Liquids with air and/or gas high %
TEMPERATURE -30°C up to 85°C
PRESSURE up to 16 bar / 230 psi
CAPACITIES up to 1.800m3/h for total head up to 70 m.w.c. GAS CONTENT up to 70%
DIAMCO DSP pump is designed to meet those special pumping situations, to enable the pump to be started with an empty inlet pipe and to allow it to pump liquids with high gas content up to 70%.
EXAMPLE OF USE: Agitator tanks, positive inlet head, low or negative inlet head, self priming applications, e.g. grated potatoes, pulps, etc.